Timbabuild EWS Wood Stabiliser 225ml

Sku: C3870-2 Supplier Code: 0002 Barcode: 5018567135030

$43.90 +GST

-
+

In Stock Buy Online now and it ships Tomorrow

This item needs to be ordered from our supplier or we are awaiting stock. Delivery times and availability may vary. Please contact us for more information.
Add To Favourites

Description

Timbabuild EWS Wood Stabiliser 225ml

Timbabuild Epoxy Wood Stabiliser is a specially designed two-part low viscosity, solvent free, resin primer which is designed to strengthen weakened wood fibres by penetrating deep into the wood. EWS is designed to be used as a primer in conjunction with the Epoxy Rapid Cure (ERC10) or Epoxy High Build (EHB60) systems. Once the damaged, decayed and discoloured wood has been removed by use of a suitable cutter tool such as a router or chisel, then the area to be treated is lightly sanded to ensure excellent adhesion. The moisture content of the wood should be no greater than 18% (check using a standard moisture meter) and damp wood should be allowed to dry naturally, or by way of a hot air gun. The two components are mixed manually into a separate container, and thoroughly agitated for one minute. The 2:1 mixing ratio should be strictly observed. EWS should be applied using a standard brush and left to cure for at least 20 minutes. Use disposable paint brushes – cleaning is not possible after use.

Key benefits

  • Solvent Free – suitable for indoors and outdoors
  • Excellent Penetration due to the Low Viscosity
  • Pre-measured to Volume 2:1 ratio to ensure accurate mix
  • High Strength & Durability
  • Fast and Simple to Use, Easy to Clean and Store
  • Used with both the ERC10 & EHB60 systems

Specifications

Estimated Coverage (Hard Wood) 2m2
Estimated Coverage (Soft Wood) 1.5m2
Estimated Coverage (Damaged Wood) 1.0m2

Downloads

Reviews

There are no reviews yet.

Be the first to review “Timbabuild EWS Wood Stabiliser 225ml”

Similar Products